Basic Transmission Procedure - Kyocera Fax System 10 Operation Manual

Sending Faxes > Basic transmission procedure

Basic transmission procedure

The basic procedure for using the fax system is explained below.
1
2
3
4
5
Select [Fax] on the Home screen.
The base screen for fax appears.
Place the originals.
For placing originals, refer to the following:
Machine's Operation Guide
Select the transmission method.
There are two transmission methods: memory transmission and direct transmission.
Memory transmission: The original is scanned into memory before communication starts.
Memory transmission is selected by default.
Direct transmission: The destination is dialed and communication starts before the original is
scanned.
Select [Direct] to change the transmission method to direct transmission. The key will be
highlighted on the touch panel. If the [Direct] is selected in the highlighted state,
the transmission method will change to memory transmission.
Fax Direct Transmission (page 3-29)
Specifying destination.
Specify the transmission destination.
Methods For Entering the Destination (page 3-7)
Selecting the functions.
Select the tab, and set transmitting functions that can be used.
FAX transmission functions (page 3-19)
3-2