Setting Send Restriction - Kyocera ECOSYS M3540idn Operation Manual

Fax Settings > Transmission Restriction

Setting Send Restriction

Restrict the other parties to which you send originals only to the ones registered in Permit FAX No. and Permit ID No. as
well as the ones registered in the Address Book. To change the sending restriction, follow the steps below.
1
2
1
Press [...] for Permit ID No. you want to change.
System Menu/Counter.
TX/RX Restriction - Permit ID List
1111
Menu
2
Enter the new number.
NOTE
For the procedure for entering a number, refer to
3
Press [OK].
4
Press [Yes] in confirmation screen.
Deleting
1
Select Permit ID No. you want to delete, and press (Delete) (the trash can icon).
System Menu/Counter.
TX/RX Restriction - Permit ID List
1111
1
Menu
2
Press [Yes] in confirmation screen.
Display the screen.
1
Press the [System Menu/Counter] key.
2
Press [ ], [FAX], [TX/RX Restriction], and then [TX Restriction].
Configure the function.
To not use the sending restriction, press [Off]. To restrict the other parties to which you send
originals only to the ones registered in Permit FAX No. and Permit ID No. as well as the ones
registered in the Address Book, press [Permit List + Address Book].
10:10
1/1
End
Registering Permit ID No. on page
2
10:10
1/1
End
8-18
8-17.