I N T R O D U C T I O; C H I P S E; Svga Setup; D I S P L A Y M E M O R - ICOP Technology ICOP-602X User Manual

4.1 Introduction
The ICOP-602XV has an on-board VGA interface. The specifications
and features are described as follows:
4.1.1 Chipset
The ICOP-602XV uses a HMC HM86508 for its SVGA controller,
which supports conventional analog CRT monitor or flat panel. In
addition, it also supports interlaced and non-interlaced analog
monitors (color and monochrome VGA) in high-resolution modes
while maintaining complete IBM VGA compatibility. Multiple
frequency (multisync) monitors are handled as if they were analog
monitors.
4.1.2 Display memory
With 1 MB memory, the VGA controller can drive CRT displays or
color panel displays with resolutions up to 1024 x 768 at 256 colors.
4.2 Flat Panel BIOS and Wiring
Below is a list of optional Flat Panel SVGA BIOS. The VGA BIOS is
combined with the system BIOS in a single. To change to another BIOS
please contact your local dealer.
MLCD.dat - Data File for MONO DSTN640*480 (Default)
example :
DSTN.dat - Data file for Color DSTN640*480
example :
44 ICOP Embedded 386SX CPU ISA Half Size SBC User's Manual
C h a p t e r 4

SVGA Setup

(1) HOSIDEN HLM6667
(2) HITACHI LMG5160XUFC
(3) CASIO MD650TS00-01
(4) OPTREX DMF_50260NFU-FW-8
(1) Sanyo LCM-5331-22NTK
(2) SHARP LM64C35P