ICOP Technology ICOP-602X User Manual page 13

C h a p t e r 1
Introduction
1.1 Features
The ICOP-602X contains all standard motherboard features such as :
386SX-40 compatible CPU, CRT and Flat Panel SVGA controller, serial and
parallel ports, floppy and EIDE disk controller.
The modules SSD socket can accommodate a DiskOnChip ® 2000, a new
generation of high performance single-chip Flash Disks of up to 144 MB.
The ICOP-602X is a core module for high performance control applications
in demanding embedded applications. Because the module implements all
key functions of a full PC/AT compatible system any standard PC compiler
or debugger can be used, resultng in a significantly reduced software
develop-ment cycle.
Enhanced IDE, High Speed I/O
In addition, the ICOP-602X has one PS/2 mouse port, serial ports (RS-232
or RS485), one bidirectional printer port that supports SPP, ECP andEPP
modes, an enhanced IDE HDD interface that supports PIO mode 4, and a
floppy disk controller.
Flash/EPROM Disk or DiskOnChip
The onboard socket can accept up to 2 MB EPROM or 1 MB Flash memory.
Both sockets can by jumper setting be assigned to hold a DiskOnChip.
There areno combinations possible of devices, it is either Flash, EPROM or
DiskOn-Chip.
Watchdog Timer
The watchdog timer optionally monitors system operation and can invoke
asystem reset when your application loses control over the system. The
timing of the watchdog timer is programmable by software.
ICOP Embedede 386SX CPU ISA Half Size SBC User's Manual 9