ICOP Technology ICOP-602X User Manual page 82

80 Keyboard test started. clearing output buffer, checking for stuck key,
About to issue keyboard reset command.
81 Keyboard reset error/stuck key found. About to issue keyboard controller
interface test command.
82 Keyboard controller interface test over. About to write command byte and
init circular buffer.
83 Command byte written, Global data init done. About to check for lock-key.
84 Lock-key checking over. About to check for memory size mismatch with
cmos.
85 Memory size check done. About to display soft error and check for
password or bypass setup.
86 Password checked. About to do programming before setup.
87 Programming before setup complete. Going to cmos setup program.
88 Returned from cmos setup program and screen is cleared. About to do
programming after setup.
89 Programming after setup complete. Going to display power on screen
message.
8A First screen message displayed. About to display <WAIT...>message
8B <WAIT...> message displayed. About to do Main and Video BIOS shadow .
8C Main and Video BIOS shadow successful. Setup options programming
after cmos setup about to start.
8D Setup options are programmed, mouse check and init to be done next.
8E Mouse check and initialization complete. Going for hard disk, floppy
reset.
8F Floppy check returns that floppy is to be initialized. Floppy setup to
follow.
90 Floppy setup is over. Test for hard disk presence to be done.
91 Hard disk presence test over. Hard disk setup to follow.
92 Hard disk setup complete. About to go for BIOS ROM data area check.
93 BIOS ROM data area check halfway. BIOS ROM data area check to be
complete.
78 ICOP Embedded 386SX CPU ISA Half Size SBC User's Manual