ICOP Technology ICOP-602X User Manual page 83

94 BIOS ROM data area check over. Going to set base and extended
memory size.
95 Memory size adjusted due to mouse support, hdisk type-47. Going to
verify from display memory.
96 Returned after verifying from display memory. Going to do any init before
C800 optional ROM control
97 Any init before C800 optional ROM control is over. Optional ROM check
and control will be done next.
98 Optional ROM control is done. About to give control to do any required
precessing after optional ROM returns control.
99 Any initialization required after optional ROM test over. Going to setup
timer data area and printer base address.
9A Return after setting timer and printer base address. Going to set the RS-
232 base address.
9B Returned after RS-232 base address. Going to do any initialization
before Coprocessor test
9C Required initialization before coprocessor is over. Going to initialize the
coprocessor next.
9D Coprocesor initialized. Going to do any initialization after Coproces-sor
test.
9E Initialization after coprocessor test is complete. Going to check extd
keyboard, keyboard ID and num-lock.
9F Extd keyboard check is done, ID flag set. num-lock on/off. Keyboard ID
command to be issued.
A0 Keyboard ID command issued. Keyboard ID flag to be reset.
A1 Keyboard ID flag reset. Cache memory test to follow.
A2 Cache memory test over. Going to display any soft errors.
A3 Soft error display complete. Going to set the keyboard typematic rate.
A4 Keyboard typematic rate set. Going to program memory wait states.
A5 Memory wait states programming over. Screen to be cleared next.
A6 Screen cleared. Going to enable parity and NMI.
A7 NMI and parity enabled. Going to do any initialization required before
giving control to optional ROM at E000.
ICOP Embedede 386SX CPU ISA Half Size SBC User's Manual 79