ICOP Technology ICOP-602X User Manual page 79

27 Global data initialization is over. Any initialization after interrupt vector to
be done next.
28 Initialization after interrupt vector is complete. Going for mono-chrome
mode setting.
29 Monochrome mode setting is done. Going for Color mode setting.
2A Color mode setting is done. About to go for toggle parity before optional
rom test.
2B Toggle parity over. About to give control for any setup required before
optional video ROM check.
2C Processing before video ROM control is done. About to look for optional
video ROM and give control.
2D Optional video ROM control is done. About to give control to do any
processing after video ROM returns control.
2E Return from processing after the video ROM control. If EGA/VGA not
found then do display memory R/W test.
2F EGA/VGA not found. Display memory R/W test about to begin.
30 Display memory R/W test passed. About to look for the retrace checking.
31 Display memory R/W test or retrace checking failed. About to do
alternate
Display memory R/W test.
32 Alternate Display memory R/W test passed. About to look for the
alternate display retrace checking.
33 Video display checking over. Verification of display type with switch
setting and actual card to begin.
34 Verification of display adapter done. Display mode to be set next.
35 Display mode set complete. BIOS ROM data area about to be checked.
36 BIOS ROM data area check over. Going to set cursor for power on
message.
37 Cursor setting for power on message id complete. Going to display the
power on message.
38 Power on message display complete. Going to read new cursor position.
39 New cursor position read and saved. Going to display the refer-ence
string.
ICOP Embedede 386SX CPU ISA Half Size SBC User's Manual 75