ICOP Technology ICOP-602X User Manual page 80

3A Reference string display is over. Going to display the Hit <ESC>
message.
3B Hit <ESC> message displayed. Virtual mode memory test about to start.
40 Preperation for virtual mode test started. Going to verify from video
memory.
41 Returned after verifying from display memory. Going to prepare the
descriptor tables.
42 Descriptor tables prepared. Going to enter in virtual mode for memory
test.
43 Entered in the virtual mode. Going to enable interrupts for diagnos-tics
mode.
44 Interrupts enabled (if diagnostics switch is on). Going to initialize data to
check memory wrap around at 0:0.
45 Data initialized. Going to check for memory wrap around at 0:0 and
finding the total system memory size.
46 Memory wrap around test done. Memory size calculation over. About to
go for writing patterns to test memory.
47 Pattern to be tested written in extended memory. Going to write patterns
in base 640k memory.
48 Patterns written in base memory. Going to find out amount of memory
below 1M memory.
49 Amount of memory below 1M found and verified. Going to find out
amount of memory above 1M memory.
4A Amount of memory above 1M found and verified. Going for BIOS ROM
data area check.
4B BIOS ROM data area check over. Going to check <ESC> and to clear
memory below 1M for soft reset.
4C Memory below 1M cleared. (SOFT RESET) Going to clear memory above
1M.
4D Memory above 1M cleared. (SOFT RESET) Going to save the memory
size.
4E Memory test started. (NO SOFT RESET) About to display the first 64k
memory test.
76 ICOP Embedded 386SX CPU ISA Half Size SBC User's Manual