Sorter - Canon iR2200 Service Handbook

4.3 SORTER

PNCH-HLE
Use it to adjust the punch hole position (paper feed direction) when the
puncher unit is in use.
• A higher setting shifts the punch hole toward the leading edge of paper
(middle of paper).
Range of -3 to +3 (in mm)
adjustment
Using the Mode
1) Make a print of the Test Chart, and check the position of the hole.
2) Select the item, and change the setting to adjust.
3) Press the OK key.
4) Make a print of the Test Chart once again, and check to make sure that
the hole position is as indicated.
Feed direction
Higher setting Lower setting
F05-403-01
CHAPTER 5 SERVICE MODE
Paper
SORTER>ADJUST
5-59