CHAPTER 3 STANDARDS AND ADJUSTMENTS
4 Fixing System
4.1 Mounting the Locking Cam Unit
1) Check to see if the feeding assembly is
locked in place.
2) Match the arrow of the gear of the lock-
ing cam unit [1] against the middle of
the gear [3] of the fixing drive unit (e.i.,
where the rear [4] of the gear of the
locking cam unit is in contact with the
cut-up [5] of the frame).
3-16
[5]
[1]
F03-401-01
[2]
[3]
[4]