The Copy Is Blurred - Canon iR2200 Service Handbook

3.18 The copy is blurred.

Scanner drive cable
1) Is the cable wound on the wire pulley twisted or twined when the scan-
ner is moving? Is there e foreign matter in the mirror pulley assembly?
YES:
•
•
•
Scanner rail
2) Move the No. 1 mirror base slowly by hand. Does it move smoothly?
NO:
Drum drive assembly, Photosensitive drum
3) Does the problem occur at intervals of about 94 mm?
YES:
•
•
Developing gear, Drum drive assembly, Drum unit
4) Does the problem occur at intervals of about 35 mm?
YES: Check the developing assembly.
NO:
•
•
CHAPTER 4 TROUBLESHOOTING IMAGE FAULTS/MALFUNCTIONS
Route the cable correctly.
Replace the cable.
Remove the foreign matter.
Clean the surface of the scanner rail with alcohol; thereafter, apply
a small amount of silicone oil.
Check the drum drive assembly.
Check the drum ends (where developing block members remain in
contact) for a scratch or foreign matter.
Check the drum drive assembly.
Replace the drum unit.
4-21