Table of Contents
Advertisement
12.2 Operation Settings
12.2.1 Operation setting functions
Setting regarding GOT operation can be set.
The items which can be set are described below.
Function
Buzzer volume
Buzzer volume setting can be changed
Window move
Whether turn ON/OFF buzzer when move window can
buzzer volume
be selected
Touch panel
sensitivity
can be
Calibration
adjusted
using this
function
The sensitivity of touch panel when GOT screen is
Key reaction
touched can be set
Set the method to adjust the time between the GOT
Clock setting
clock data and clock data of the connected controller.
Security
Security level screen can be displayed
Utility call
Utility call key setting screen can be displayed
*1 The more the value set for [Key reaction] is high, the more the key reaction speed slows.
"Key reaction" [ms]
For example, when the GOT recognizes touching the GOT screen once as touching the screen twice, set
a higher value for [Key reaction].
12 - 8
12.2 Operation Settings
12.2.1 Operation setting functions
Contents
GT1020
GT1030
Standard(±0)
Operation settings by drawing software
Set buzzer volume and window move buzzer volume by [GOT setup] in [System
Environment] of GT Designer2.
When using GT Designer3, execute the settings at [GOT Setup...] of [GOT
Environmental Setting].
When change a part of the setting, change the setting by the GOT display setting
after downloading the project data.
GT Designer2 Version
GT Designer3 Version
GT104
GT105
−
+10
+20
+40
Screen Design Manual
Screen Design Manual (Fundamentals)
Setting range
OFF/SHORT/LONG
<At factory shipment: SHORT>
ON/OFF
<At factory shipment: ON>
−
<At factory shipment: already adjusted>
±0 to +120
*1
For GT1020 : None, Adjust
For GT1030, GT104 , GT105
None, Adjust, Broadcast, Both
<At factory shipment: Adjust>
−
−
+80
+120
:
Advertisement
Table of Contents
