Parameter Setting - Mitsubishi GT10 User Manual

15.3.15 Parameter setting

Sets FX PLC parameters.
1 Parameters that can be changed and change targets
(1) Parameters that can be changed
The parameters that can be changed with the MELSEC-FX list editor and the target FX PLCs are
as follows.
Item
Memory space setting
File register space setting
Latch range setting
RUN terminal setting
Initialization of parameters
*1 When connecting an FX0(S), set "0".
Setting other than "0" causes a parameter error.
*2 When the parameters are initialized, the display on the MELSEC-FX list editor is different from the FX PLC default values, but
do not change the latch range. Changing the latch range causes an error.
(2) Change targets
When a memory cassette is mounted, the parameters in the memory cassette are targeted for
changes.
2 Operation
*1
Stop the FX PLC
*1 When checking parameters (not changing), it is not necessary to stop the PLC.
FX0(S)
FX1 FX2(C)
/FX0N
*1
*2
OP [Parameter setting]
*1
Stop the FX PLC
OP Select [Parameter setting] with
GO
( : Can be set/changed
Target CPU
FX1S FX1N(C)
*2 *2
GO
or
15.3 FX List Editor (For GT104[ ], GT105[ ] only)
15.3.15 Parameter setting
: Cannot be set/changed)
FX2N(C) FX3G FX3U(C)
.
15 - 35
9
10
11
12
13
14
15
16