Caution For Compliance With Emc Directive - Mitsubishi GT10 User Manual

8.8.4 Installation
1 Installed with DIN rail
Install the multi-drop connection module with its hook (1 place) using the DIN rail.
• Applicable DIN rail DIN46277 (width: 35mm)
(Install the DIN rail with screws at intervals of 150mm.)
2 Directly installed to panel
Install the multi-drop connection module to the panel using 4.5mm holes (2 places).
8.8.5

Caution for compliance with EMC Directive

Programmable logic controllers are open-type devices that must be installed and used within conductive
control boxes. Please use the Multi-Drop Connection Unit while installed in conductive shielded control
boxes. Please secure the control box lid to the control box (for conduction). Installation within a control box
greatly affects the safety of the system and aids in shielding noise from the Multi-Drop Connection Unit.
8.8 Serial Multi-Drop Connection Unit
8.8.4 Installation
1
2
3
4
5
6
7
8
8 - 23