Access Range - Mitsubishi GT10 User Manual

4 Functions list and monitor conditions
The following shows the memory that can be monitored by the MELSEC-FX list editor and the FX PLC
status conditions.
Function
Displaying sequence
Reading
programs
sequence
Searching commands/
programs
devices
Writing Writing commands
sequence
Changing operands/set
programs
values
Inserting commands
Deleting commands
Sequence program all clear
PLC diagnostics
Parameter setting
Keyword
*1 The operation is available only when the protect switch is OFF.
*2 The available memory differs depending on the FX PLC being used.
For further information, see the following manual.

15.3.3 Access range

The access range is the same as the access range when the GOT is connected to a controller.
Refer to the following manual for details of the access range.
15 - 16 15.3 FX List Editor (For GT104[ ], GT105[ ] only)
15.3.3 Access range
( : Can be monitored
Built-in
memory
Display
Set
The hardware manual of the FX PLC being used
GT Designer2 Version
GOT1000 Series Connection Manual (Mitsubishi Products)
: Can be monitored under certain conditions
Memory that can be monitored
EEPROM
memory
RAM memory
cassette, flash
cassette
memory
cassette
*1
*1
Screen Design Manual
: Cannot be monitored)
*2
FX PLC
EPROM
status
memory
cassette
RUN/
STOP
For Stop
only
RUN/
STOP
For Stop
only
RUN/
STOP
Reference
SubSection
15.3.8
SubSection
15.3.9
SubSection
15.3.10
SubSection
15.3.11
SubSection
15.3.10
SubSection
15.3.12
SubSection
15.3.13
SubSection
15.3.14
SubSection
15.3.15
SubSection
15.3.16