Table of Contents
Advertisement
No.
Item
6)
Counting method
7)
Reset coil ON/OFF
8)
CPU No. specification
*1 : Displays the values set for the timer/counter when registering the timer/counter for the ACPU, QnACPU, or
FXCPU.
2
Key functions
The following table describes the key functions displayed on the device monitor screen.
Key switch
DEV
TEST
DEC/HEX
ESC
Displays the counting method when registering the counters from
C200 to C255.
UP: Up count mode
Displays the reset coil state when registering the timer/counter for the
FXCPU.
: ON
0 to 4: This item must be set only when the GOT is connected to the
Q series CPU in the multiple CPU system or QnUCPU.
Changing the CPU No. cancels the registration for all the devices.
Section 15.2.7 Device registration
Switches the screen to the device registration key window for registering devices to be
monitored.
Section 15.2.7 Device registration
Switches the quick test mode between enabled and disabled states.
Section 15.2.8 Quick test
Switches the numerical notation of word device values between decimal and
hexadecimal numbers. (GT1030 only)
: Scrolls the list up by one line to display the device number right before the device
number displayed in the top line.
: Scrolls the list down by one line to display the device number right after the device
number displayed in the bottom line.
Exits the device monitor, and then the screen returns to the debug screen.
15.2.5 Information displayed on the device monitor screen and key functions
Description of setting
DOWN: Down count mode
: OFF
Function
15.2 Device Monitor
9
10
11
12
13
14
15
16
15 - 5
Advertisement
Table of Contents
