System - Cisco SPA112 Administration Manual

Configuring the Voice Settings

System

System
Cisco SPA100Series Administration Guide
Field
Call 1 and 2
Decode Latency
Call 1 and 2 Jitter
Call 1 and 2 Round
Trip Delay
Call 1 and 2
Packets Lost
Call 1 and 2 Packet
Error
Custom CA Status
Field
Custom CA Provisioning
Status
Custom CA Info
Use the Voice > System page to configure general voice system settings and to
enable logging by using a syslog server. (Logging also can be configured in the
Administration > Logging pages. For more information, see
Enter the settings as described below. After making changes, click Submit to
save your settings, or click Cancel to redisplay the page with the saved settings.
Requirements for Logging
• You need a computer that is on the same subnetwork as the ATA, to capture
the log files. This computer needs to be running a syslog daemon. Enter the
IP address of this computer in the Syslog Server and Debug Server fields.
Description
The number of milliseconds for decoder latency.
The number of milliseconds for receiver jitter
The number of milliseconds for delay.
The number of packets lost.
The number of invalid packets received.
Description
The status of the latest custom CA (Certificate
Authority) certificate download.
The successfully downloaded CA information, or
"Not Installed" if no custom CA certificate was
installed.
Default setting: Not Installed
4
Logging, page 114.)
48