Cisco SPA112 Administration Manual page 59

Configuring the Voice Settings
SIP
Cisco SPA100Series Administration Guide
Field
NSE Codec Name
AVT Codec Name
G711u Codec
Name
G711a Codec
Name
G726r32 Codec
Name
G729a Codec
Name
G729b Codec
Name
EncapRTP Codec
Name
NAT Support Parameters
Field
Handle VIA
received
Handle VIA rport
Description
NSE codec name used in SDP.
Default setting: NSE
AVT codec name used in SDP.
Default setting: telephone-event
G.711u codec name used in SDP.
Default setting: PCMU
G.711a codec name used in SDP.
Default setting: PCMA
G.726-32 codec name used in SDP.
Default setting: G726-32
G.729a codec name used in SDP.
Default setting: G729a
G.729b codec name used in SDP.
Default setting: G729ab
EncapRTP codec name used in SDP.
Default setting: encaprtp
Description
If you select yes, the ATA processes the received
parameter in the VIA header (this value is inserted by the
server in a response to any one of its requests) If you
select no, the parameter is ignored. Select yes or no from
the drop-down menu.
Default setting: no
If you select yes, the ATA processes the rport parameter
in the VIA header (this value is inserted by the server in a
response to any one of its requests) If you select no, the
parameter is ignored. Select yes or no from the drop-
down menu.
Default setting: no
4
58