Log Setting - Cisco SPA112 Administration Manual

Administration Settings
Logging
NOTE
Cisco SPA100Series Administration Guide
Field
Local
E-Mail
Syslog Server

Log Setting

If logging is enabled on the Administration > Log > Log Module page, the ATA can
periodically send the log file to a server or to an email address. Use the Log
Setting page to enter the information for your syslog server and email account.
For information about enabling and configuring logging, see
page 114.
Enter the settings as described below. After making changes, click Submit to save
your settings, or click Cancel to redisplay the page with the saved settings.
Local
Field
Log Size
Syslog Server
Field
IP Address
Description
Check the box in the heading row to include all services
in the local logs that can be viewed in the Log Viewer.
Alternatively, check the box for kernel or system to
include that service in the local log.
Check the box in the heading row to include all services
in the emailed logs, if configured on the Log Setting
page. Alternatively, check the box for kernel or system to
include that service in the emailed log.
Check the box in the heading row to include all services
in the log file that is transmitted to the syslog server.
Alternatively, check the box for kernel or system to
include that service in the log file.
Description
Enter the maximum size of the log file in kilobytes. Valid
values are from 128 to 1024.
Description
Enter the IP address of the syslog server where the
messages will be sent.
5
Log Module,
116