Ssl/Tls Certificate; Server Certification - Cisco SPA112 Administration Manual

Configuring the Voice Settings

SSL/TLS Certificate

SSL/TLS Certificate
Cisco SPA100Series Administration Guide
Field
Cfwd Ring Splash
Len
Cblk Ring Splash
Len
VMWI Ring Policy
VMWI Ring Splash
Len
Ring On No New
VM

Server Certification

If a device is upgraded to SW 1.3.3 or later, the provisioning server requests a
server certification signed by the Cisco 2K Small Business CA or can use the
certificate signed by 1K CA.
Description
Duration of ring splash when a call is forwarded (0 – 10.0s)
Default setting: 0
Duration of ring splash when a call is blocked (0 – 10.0s)
Default setting: 0
The parameter controls when a ring splash is played when
a the VM server sends a SIP NOTIFY message to the ATA
indicating the status of the subscriber's mail box. Three
settings are available.
Default setting: New VM Available
• New VM Available: Ring as long as there new
voicemail messages.
• New VM Becomes Available: Ring at the point when
the first new voicemail message is received.
• New VM Arrives: Ring when the number of new
voicemail messages increases.
Duration of ring splash when new messages arrive before
the VMWI signal is applied (0 – 10.0s)
Default setting: 0
If enabled, the ATA plays a ring splash when the voicemail
server sends SIP NOTIFY message to the ATA indicating
that there are no more unread voice mails. Some
equipment requires a short ring to precede the FSK signal
to turn off VMWI lamp.
Default setting: no
4
105