Cisco SPA112 Administration Manual page 91

Configuring the Voice Settings
Line 1 and Line 2 Settings (PHONE Port1 and PHONE2)
Cisco SPA100Series Administration Guide
Field
Emergency
Number
Mailbox ID
Proxy and Registration
Field
Proxy
Outbound Proxy
Use Outbound
Proxy
Use OB Proxy In
Dialog
Register
Make Call Without
Reg
Description
Comma separated list of emergency number patterns. If
outbound call matches one of the pattern, the ATA will
disable hook flash event handling. The condition is
restored to normal after the call ends. Blank signifies that
there is no emergency number. Maximum number length is
63 characters.
Default setting: blank
Enter the ID number of the mailbox for this line.
Default setting: blank
Description
SIP proxy server for all outbound requests.
Default setting: blank
SIP Outbound Proxy Server where all outbound requests
are sent as the first hop.
Default setting: blank
Enables the use of an Outbound Proxy. If set to no, the
Outbound Proxy and Use OB Proxy in Dialog parameters
are ignored.
Default setting: no
Whether to force SIP requests to be sent to the outbound
proxy within a dialog. Ignored if the parameter Use
Outbound Proxy is no, or the Outbound Proxy parameter is
empty.
Default setting: yes
Enable periodic registration with the Proxy parameter. This
parameter is ignored if Proxy is not specified.
Default setting: yes
Allow making outbound calls without successful (dynamic)
registration by the unit. If No, dial tone will not play unless
registration is successful.
Default setting: no
4
90