Web Access Management - Cisco SPA112 Administration Manual

Administration Settings
Management
Cisco SPA100Series Administration Guide

Web Access Management

Use the Administration > Management > Web Access Management page to
configure the settings for access to the administration of the ATA.
Cisco SPA112 Web Access Management fields
Access to the Cisco SPA112 configuration utility is enabled by default. Admin
Access allows you to manage the configuration from a computer in your office
network, and Web Utility Access allows you to connect from a computer on a
different subnet or on the Internet. To access the configuration utility, launch a web
browser and enter the URL in the Address bar. The URL must include the specified
protocol, the WAN IP address of the ATA, and the specified port number. For
example, with the HTTPS protocol, a WAN IP address of 203.0.113.50, and port 80,
you would enter: https://203.0. 1 13.50:80
Field
Admin Access
Web Utility Access
Remote
Management Port
Description
This feature controls access to the configuration utility
from devices that are connected via the ETHERNET
(LAN) port.
Click Enabled to enable this feature, or click Disabled to
disable it. The default setting is Enabled. If you
administer and configure the ATA from a computer that
is connected to the LAN, this feature must be enabled.
Select the protocol to use for access to the
configuration utility from a device on the WAN. Choose
HTTP and/or HTTPS. For secure Internet access, select
HTTPS. The default value is HTTP.
Enter the port number to use for access to the
configuration utility from a device on the WAN. The
default port number is 80.
5
107