Cisco SPA112 Administration Manual page 114

Administration Settings
Management
Cisco SPA100Series Administration Guide
Settings for SNMPv3
Field
Enabled, Disabled
R/W User
Auth-Protocol
Auth-Password
PrivProtocol
Privacy Password
Trap Configuration
Field
IP Address
Port
SNMP Version
Description
Click Enabled to enable this feature, or click Disabled to
disable it. The default setting is Disabled.
Enter the user name for SNMPv3 authentication. The
default value is v3rwuser.
Choose the SNMPv3 authentication protocol from the
drop-down list (HMAC-MD5 or HMAC-SHA).
Enter the authentication password.
Choose a privacy authentication protocol from the drop-
down list (None or CBC-DES). If you select CBCDES, the
privKey encrypts the data portion of the message that is
being sent.
Enter the key for the authentication protocol to use.
Description
The IP Address of the SNMP manager or trap agent.
The SNMP trap port used by the SNMP manager or trap
agent to receive the trap messages. Valid entries are
162 or 1025~65535. The default value is162.
The SNMP version in use by the SNMP manager or trap
agent. Choose a version from the list.
5
112