Cisco SPA112 Administration Manual page 72

Configuring the Voice Settings
Regional
Cisco SPA100Series Administration Guide
Field
Holding Tone
Conference Tone
Secure Call
Indication Tone
Feature Invocation
Tone
Distinctive Ring Patterns
Field
Ring1 Cadence
Ring2 Cadence
Ring3 Cadence
Ring4 Cadence
Ring5 Cadence
Ring6 Cadence
Ring7 Cadence
Ring8 Cadence
Description
Informs the local caller that the far end has placed the call
on hold.
Default setting: 600@-5;*(.1/.1/1,.1/.1/1,.1/9.5/1)
Played to all parties when a three-way conference call is
in progress.
Default setting: 350@-5;20(.1/.1/1,.1/9.7/1)
Played when a call has been successfully switched to
secure mode. It should be played only for a short while
(less than 30 seconds) and at a reduced level (less than -
19 dBm) so it does not interfere with the conversation.
Default setting: 397@-5,507@-5;15(0/2/0,.2/.1/1,.1/2.1/2)
Played when a feature is implemented.
Default setting: 350@-4;*(.1/.1/1)
Description
Cadence script for distinctive ring 1.
Default setting: 60(2/4)
Cadence script for distinctive ring 2.
Default setting: 60(.8/.4,.8/4)
Cadence script for distinctive ring 3.
Default setting: 60(.4/.2,.4/.2,.8/4)
Cadence script for distinctive ring 4.
Default setting: 60(.3/.2,1/.2,.3/4)
Cadence script for distinctive ring 5.
Default setting: 1(.5/.5)
Cadence script for distinctive ring 6.
Default setting: 60(.2/.4,.2/.4,.2/4)
Cadence script for distinctive ring 7.
Default setting: 60(.4/.2,.4/.2,.4/4)
Cadence script for distinctive ring 8.
Default setting: 60(0.25/9.75)
4
71