Cisco SPA112 Administration Manual page 58

Configuring the Voice Settings
SIP
Cisco SPA100Series Administration Guide
Field
Stats In BYE
SDP Payload Types
Field
NSE Dynamic
Payload
AVT Dynamic
Payload
INFOREQ Dynamic
Payload
G726r32 Dynamic
Payload
G729b Dynamic
Payload
EncapRTP
Dynamic Payload
RTP-Start-
Loopback
Dynamic Payload
RTP-Start-
Loopback Codec
Description
Determines whether the ATA includes the P-RTP-Stat
header or response in a BYE message. The header
contains the RTP statistics of the current call. Select yes or
no from the drop-down list.
Default setting: yes
The format of the P-RTP-Stat header is:
P-RTP-State: PS=<packets sent>,OS=<octets
sent>,PR=<packets received>,OR=<octets
received>,PL=<packets lost>,JI=<jitter in ms>,LA=<delay
in ms>,DU=<call duration
ins>,EN=<encoder>,DE=<decoder>.
Description
NSE dynamic payload type. The valid range is 96-127.
Default setting: 100
AVT dynamic payload type. The valid range is 96-127.
Default setting: 101
INFOREQ dynamic payload type.
Default setting: blank
G726r32 dynamic payload type.
Default setting: 2
G.729b dynamic payload type. The valid range is 96-127.
Default setting: 99
EncapRTP Dynamic Payload type.
Default setting: 112
RTP-Start-Loopback Dynamic Payload type.
Default setting: 113
RTP-Start-Loopback Codec. Select one of the following:
G711u, G711a, G726-32, G729a.
Default setting: G711u
4
57