Connecting The Equipment - Cisco SPA112 Administration Manual

Getting Started

Connecting the Equipment

Connecting the Equipment
NOTE
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
Cisco SPA100Series Administration Guide
Feature Description
Internet (Blue)
Connect to a broadband network device (DSL or
cable modem) or a network router, using an Ethernet
cable.
Power
Connect to a power source, using the provided
power adapter.
For wall-mounting instructions, see
Connect one end of the provided Ethernet cable to the Internet (Blue) port.
Connect the other end directly to your broadband network device.
Connect one end of a phone cable to the Phone 1 (Gray) port. Connect the other
end to your analog phone or fax machine.
Connect one end of another phone cable to another analog phone or fax machine.
Connect the other end to the Phone 2 (Gray) port.
SPA122 Only: Optionally, connect one end of an Ethernet network cable to the
ETHERNET (Yellow) port of the ATA. Connect the other end to a device on your
network, such as a computer.
Connect the provided power adapter to the Power port.
Mounting the ATA, page
WAN
1
18.
13