Cisco SPA112 Administration Manual page 17

Getting Started
Configuration and Management of the ATA
Cisco SPA100Series Administration Guide
–Press 1 to save the IP address or press the * (star) key to cancel your
entry and return to the main menu.
IVR Actions
IVR Action
Enter IVR Menu
Check Internet Connection
Type
Set Internet Connection
Type
Check Internet IP Address
(WAN port)
Set Static IP Address
(WAN)
Check Network Mask
Set Network Mask
Menu Choices and Instructions
Option
****
100
101 DHCP: 0
Static IP: 1
PPPoE: Press 2
PPPoE, DHCP: Press 3
DHCP, PPPoE: Press 4
110
111 Enter the IP address by
using numbers on the
telephone key pad. Use the
* (star) key when entering a
decimal point.
Note: This option is
available only after you
choose Static IP as the
Internet Connection Type,
through option 101.
120
To enter the value, press
121
numbers on the telephone
key pad. Press the * (star)
key to enter a decimal
point.
Note: This option is
available only after you
choose Static IP as the
Internet Connection Type,
through option 101.
1
16