Cisco SPA112 Administration Manual page 50

Configuring the Voice Settings
System
Cisco SPA100Series Administration Guide
• You can deploy a syslog server to receive syslog messages from the ATA,
which acts as a syslog client. The syslog client device uses the syslog
protocol to send messages, based on its configuration, to a syslog server.
The syslog messages can be accessed by reviewing the "syslog.514.log"
file which resides in the same directory as the slogsrv.exe syslog server
application.
• Partners can download the Syslog Server for SPA Devices by using the link
below (login required):
www.cisco.com/en/US/partner/prod/collateral/voicesw/ps6788/phones/
ps10499/syslog_server_for_spa_devices.zip
Enter the settings as described below. After making changes, click Submit to save
your settings, or click Cancel to redisplay the page with the saved settings.
System Configuration
Field
Restricted Access
Domains
IVR Admin
Password
Network Startup
Delay
Miscellaneous Settings
Field
DNS Query TTL
Ignore
Syslog Server
Description
This feature is not currently used.
Password for the administrator to manage the ATA by
using the built-in IVR through a connected phone.
The number of seconds of delay between restarting the
voice module and initializing network interface.
Default setting: 3
Description
In DNS packages, the server will suggest a TTL value to
the client; if this parameter is set to yes, the value from the
server will be ignored.
Default setting: yes
Specify the syslog server name and port. This feature
specifies the server for logging ATA system information
and critical events. If both Debug Server and Syslog
Server are specified, Syslog messages are also logged to
the Debug Server.
Default setting: blank
4
49