PAPER FEED [ALL MODELS]
6.4.4 BY-PASS TRAY [G112/G113/G116]
[A]
G116D103.WMF
[E]
[F]
[B]
[D]
[C]
G116D101.WMF
The bypass paper sensor [A] detects when paper is put on the tray. The CPU
energizes the by-pass feed clutch [B]. Then the by-pass feed roller [D] starts to
feed paper to the registration roller [F] through the relay roller [E].
The by-pass feed roller shaft has two cams [C]. These cams release the bottom
plate to press the stack of paper against the feed roller.
NOTE: The feed roller has a metal plate to prevent bad effects from too much
friction between the feed roller and friction pad.
G112/G113/G116/G094/G095/G091
6-30
SM