IMAGE FUSING AND PAPER EXIT [ALL MODELS]
6.5.2 FUSING DRIVE [ALL MODELS]
[A]
The main motor [A] drives the fusing unit through a gear train.
6.5.3 FUSING ENTRANCE AND GUIDE SHAFT [ALL MODELS]
[B]
NOTE: 1) The entrance guide [A] is adjustable for paper thickness to prevent
creasing.
2) If creasing occurs frequently in the fusing unit, remove all screws [B]
and slide the entrance guide to the right. Replace the two end screws
only. Do not replace the middle screw.
3) This procedure allows paper to have more direct access to the gap
between the hot roller and the pressure roller.
G112/G113/G116/G094/G095/G091
[A]
[B]
6-32
G094D504.WMF
[B]
G094D545.WMF
SM