Ricoh G112 Service Manual page 93

5802 Free run
The machine performs a free run.
Press [Enter] to start.
Press [Enter] to stop.
Please note that the machine will not stop immediately after the [Enter] key is
pressed.
5803 Input check
Displays signals received from sensors and switches.
NOTE:
SP Modes other than those listed in this table, are not used in the
machine.
Operation Panel
5803 1 Front Door
5803 2 MainMotLock
5803 3 PolygonLock
5803 5 Duplex door
5803 6 Duplex set
5803 7 Fusing set
5803 11 StdTrayFul
5803 16 Regist
5803 17 Pap Output
5803 18 Dup in/out
5803 19 Dup In
5803 20 Duplex Out
5803 21 PinBypass
5803 22 NoT1paper
5803 23 Tray1 Size
5803 24 T1 Remains
5803 26 No T2 paper
5803 29 No T3 paper
5803 30 Tray 3 Size
5803 31 T3 remains
5803 32 Carrier 2
5803 33 Carrier 3
5803 34 Tray 2 size
5803 36 Tray2 Remains
SP 5803 41-54 are for the G116 and G091 models only. These SP Modes are not used
in the G112 Series machines.
5803 41 Exit Door
5803 42 Sft Carrier
5803 43 Sft to R
5803 44 Sft to L
5803 45 PaperinB1
5803 46 Bin1 Full
5803 47 PaperinB2
5803 48 Bin2 Full
5803 49 PaperinB3
SM
PRINTER ENGINE SERVICE MODE [ALL MODELS]
Component Name
Front cover safety switch
Main Motor Lock
Polygon Motor Lock
Duplex Unit cover switch
Duplex Unit
Fusing Unit
Paper Overflow Sensor
Registration Sensor
Paper Exit Sensor
Duplex Invertor Sensor
Duplex Entrance Sensor
Duplex Exit Sensor
Bypass paper sensor
Paper end sensor-Standard Paper Tray Unit
Paper size switch-Standard tray
Remaining paper sensor-Standard tray
Paper end sensor-1st Optional Paper Tray Unit
Paper end sensor-2nd Optional Paper Tray Unit
Paper size switch-2nd Optional Paper Tray Unit
Remaining paper sensor-2nd Optional Paper
Tray Unit
Paper feed sensor-1st Optional Paper Tray Unit
Paper feed sensor-2nd Optional Paper Tray Unit
Paper size switch-1st Optional Paper Tray Unit
Remaining paper sensor-1st Optional Paper Tray
Unit
Paper output tray cover sensor
Shift tray paper transport sensor
Shift tray at right
Shift tray at left
Paper sensor - 1st bin
Paper overflow sensor- 1st bin
Paper sensor - 2nd bin
Paper overflow sensor- 2nd bin
Paper sensor - 3rd bin
5-11 G112/G113/G116/G094/G095/G091