Duplex Board And Sensors - Ricoh G112 Service Manual

DUPLEX BOARD AND SENSORS

1.2 DUPLEX BOARD AND SENSORS
[B]
[A]
[C]
• Front cover (! Exterior Covers)
[A]: Duplex board bracket ( x 2)
[B]: Duplex board ( x 2, all connectors)
[C]: Inverter sensor ( x 1)
[D]: Entrance sensor ( x 1)
[E]: Exit sensor ( x 1)
NOTE: The Main Control Board has been changed so that the Duplex Unit will be
compatible with G091, which has a faster engine than the
G056/G058/G073/G074. Jamming will occur in duplex mode if the wrong
main control board is installed in the Duplex Unit in a G091. To distinguish
the unit containing the old board versus those containing the new, a
circular black mark will be affixed or printed on the box of the new unit.
G552
[D]
G552R103.WMF
[E]
G552R105.WMF
2
G552R104.WMF
SM