PRINTER ENGINE SERVICE MODE [ALL MODELS]
5844
USB
5844 1
Transfer rate
Sets the speed for USB data transmission.
5844 2 Vendor ID
5844 3 Product ID
5844 4 Dev release number
5845
Delivery Server Setting
Provides items for delivery server settings.
5845 3
Retry Interval
Determines the time interval between retries before the machine returns to
standby after an error occurs during an image transfer with the delivery
scanner or SMTP server.
5845 4
Number of Retries
Determines the number of retries before the machine returns to standby after
an error occurs during an image transfer with the delivery or SMTP server.
5846
UCS Setting
5846 3 Maximum Entries
5846 50 Init All Dir
5848
Web Service
5848 4 ac: ud
5848 11 ac: dm
5851
Bluetooth
Sets the Bluetooth security mode.
Public, Private
5856
Remote Program Update: Local port. (
When set to "enable" allows reception of firmware data via the local port (IEEE
1284) during a remote ROM update.
Disable, Enable
This setting is reset to "disable" after the machine is cycled off and on
5857
Debug Log Save Function: Not Used
Do not change this setting.
G112/G113/G116/G094/G095/G091
FS Fixation: Full Speed (Fixed)
HS/FS Auto: High Speed/Full Speed
(Automatic change)
DFU
DFU
DFU
[60~900 / 300 / 1]
[0~99 / 3 / 1]
Displays the number of maximum entries. 500
Initializes all address information data except the
administration account.
Enables or disables the udirectory access
limitation.
0000: Disabled, 0001: Enabled
Enables or disables the device management
access limitation.
0000: Disabled, 0001: Enabled
5.5)
5-16
SM