Ricoh G112 Service Manual page 99

5858 Debug Log Save Function: Not Used
Do not change this setting.
5859 Debug Log Save Function: Not Used
Do not change this setting.
5860 SMTP/POP3/IMAP
5860 2 SMTP ser port no.
5860 3 SMTP auth
5860 6 SMTP auth encryp
5860 7 POP before SMTP
5860 8 POP to SMTP wait
5860 13 POP auth encryp
5860 14 POP serv port no.
5860 22 SMTP from replace
5860 25 SMTP Auth Direct
5866 E-mail Alert
5860 1 Notice Func Email
5860 5 Add Date Field
SM
PRINTER ENGINE SERVICE MODE [ALL MODELS]
Input the SMTP server port number
SMTP authentication enable/disable
Encryption mode for SMTP authentication
enable/disable (Only valid if 5860 3 is set to
"enable")
Enable/disable POP before SMTP. If the SMTP
server does not have authentication, you can
enable POP before SMTP, them POP
authentication is available (SP 5860 13)
When using POP before SMTP, this SP mode
determines the maximum wait time between POP
authentication and connection with SMTP.
Communication stops if this time is exceeded.
If POP before SMTP is enabled, then you can
use this SP to enable or disable encryption mode
for POP authentication
Input the POP server port number
If SMTP authentication is enabled, this SP mode
determines which name is included in the e-mail
header
0: Normal sender name
1: User name used by the authentication feature
Selects directly the way of SMTP authentication if
all SMTP authentications fail due to the error in
the SP5860-006.
This SP is activated only when SP5860-003 is
set to "Enable".
Bit switch 0: LOGIN
Bit switch 1: PLAIN
Bit switch 2: CRAM MD5
Bit switch 3: DIGEST MD
Bit switch 4 - 7: Not used
Enables or disables the alert notice function by e-
mail.
[0 to 1 / 0 / 1/step]
0: Off, 1: On
Enables or disables to add the date field on the
alert notice e-mail.
[0 to 1 / 0 / 1/step]
0: Off, 1: On
5-17 G112/G113/G116/G094/G095/G091