By-Pass Tray [G091/G094/G095] - Ricoh G112 Service Manual

6.4.3 BY-PASS TRAY [G091/G094/G095]

[A]
G094D103.WMF
• The by-pass paper sensor [A] detects when paper is placed on the tray.
• The CPU energizes the by-pass feed solenoid [B]. Then the by-pass feed roller
[C] starts to feed paper to the registration roller [D] through the relay roller [E].
• The by-pass feed roller shaft has two cams [F]. These cams release the bottom
plate to press the stack of paper against the feed roller.
• There is no width sensor.
NOTE: To prevent paper feed problems from too much friction between the feed
roller and friction pad, the feed roller contains a metal plate.
SM
[B]
G094D101.WMF
6-29
PAPER FEED [ALL MODELS]
[D]
[E]
[C]
[F]
G112/G113/G116/G094/G095/G091