Energy Saver Mode [All Models]; Entering Energy Saver Mode; Exiting Energy Saver Mode - Ricoh G112 Service Manual

6.5.8 ENERGY SAVER MODE [ALL MODELS]

When the machine has been idle for a specified period of time, it will automatically
enter the Energy Saver mode.
The Energy Saver mode feature reduces power consumption by turning off the
fusing lamp. However, the +24V, +12V, and +5V lines are still active within the
machine when in Energy Saver mode. This allows the machine to return to a
"ready" state in the minimum amount of time.
When Energy Saver mode is active, the message "Energy Saver Mode" is
displayed on the operation panel.

Entering Energy Saver Mode

The user specifies the idle time setting before Energy Saver mode will be
automatically activated. The following choices are available:
• Off (energy saver mode never activates)
• 5 minutes
• 15 minutes
• 30 minutes (default)
• 60 minutes
To change this setting, use the "System" menu in the User Program Modes menu.
See the Printer Reference guide, "Making Printer Settings with the Control Panel",
or 5.7 in this manual.

Exiting Energy Saver Mode

The machine will automatically leave Energy Saver mode when one of the
following occurs:
• A print command is received from the PC
• Any cover is opened or closed
• Any operation panel keys are pressed
SM
IMAGE FUSING AND PAPER EXIT [ALL MODELS]
6-37 G112/G113/G116/G094/G095/G091