Ricoh G112 Service Manual page 104

PRINTER ENGINE SERVICE MODE [ALL MODELS]
7803 255 Paper
This SP is controlled by the controller. This counter is a page counter, so the
results can be different from SP7803 1-3 (SP7803 1-3 are controlled by the
engine and are not page counters; see above). When meter charge mode is
on (the technician does PM), use this SP mode with the NRS to check when it
is time to do PM.
7804 PM counter reset
Resets the PM counter.
Important: If a technician replaces the PM items, reset this counter after
replacing these items.
7804 1 Transfer roller
7804 2 Paper feed roller
7804 3 Fusing unit
7804 255 Paper
7807 [SC/ Jam Clear] SC/ Jam Counter Clear
7807 1 All Clear
7832 Diag Result
Press # to display a list of error codes. Nothing is displayed if no errors have
occurred.
7836 Total Memory Size
7836 1 Shows the total storage size.
7901 Assert Info DFU (Used for debugging.)
7901 1 Assert Info
7901 2 # of Lines
7901 3 Location
7910 Firmware PN
7910 1 System
7910 2 Engine
7910 13 Duplex
7910 131 Bluetooth
7910 150 RPCS
7910 151 PS
7910 152 RPDL
7910 153 R98
7910 154 R16
7910 155 RPGL
7910 156 R55
7910 157 RTIFF
7910 158 PCL
G112/G113/G116/G094/G095/G091
Clears the all counters related to SC codes and
paper jams.
DFU
DFU
DFU
5-22 SM