Setting Schedule Mode Duration; Adjusting Continuous And Motion Recording Settings - Digimerge DHU600 Series Instruction Manual

Using Web Remote Viewer

Setting Schedule Mode Duration

To set the duration of schedule mode:
1. Click Record on the navigation bar on the left. The Record Operation Setting window opens.
2. Under the Schedule Mode drop-down menu, select the duration you want to enable Schedule
Mode for (Daily or Weekly).
3. Click OK to save your settings.

Adjusting Continuous and Motion Recording Settings

To adjust continuous and motion recording settings:
1. Click the Continuous/Motion sub-menu (Record>Continuous/Motion). The Continuous/
Motion Recording Setting window opens.
Figure 36.8 Continuous/Motion Recording Settings window.
2. Under Time, drag your cursor across the grayed out boxes to highlight what time you want to
activate continuous/motion recording. When you release the cursor, the boxes turn pink to
confirm your selection. This applies the recording time globally.
Figure 36.9 Setting the time duration of continuous and motion recording. The pink boxes indicate
active recording times. In this example, the active recording times are from 12:00PM to 6:00PM.
• To configure each channel with specific recording parameters, click the Activation tab.
80
Activation tab
The FPS counter tells
you how many FPS
you have remaining to
assign to cameras
Selected Recording Time