Using Web Remote Viewer; Before You Begin; Register For Ddns; Enable Ddns On Your System - Digimerge DHU600 Series Instruction Manual

USING WEB REMOTE VIEWER

To access Web Remote Viewer, you must be connected to the internet, or the Local Area Network.

Before You Begin

You must register for a DDNS address, and enable DDNS on your DVR before you can access your
system remotely. By registering for a DDNS address, you can access your system from any
computer with a web browser.

Register for DDNS

To register for a Digimerge DDNS account see "Appendix C: Setting Up DDNS Service" on page 97.

Enable DDNS on your system

To enable DDNS on your system, see "How Do I
Enable DDNS On My System?" on page 98.

Logging into Web Remote Viewer

To log into Web Remote Viewer on your web
browser:
1. Open Internet Explorer, and type in the DDNS
address you registered with the DHU600. A login window appears.
2. Enter in your DVR's user ID and password. The Web Remote Viewer window opens.
Figure 31.0 Web Remote Viewer window prompting for an Active X install.
3. Click the Active X menu bar near the top of the browser. Click Install ActiveX Control.
Figure 31.1 Click Install ActiveX Control to install ActiveX onto your browswer.
Using Web Remote Viewer Locally
• To log in to Web Remote Viewer from a local network , enter
your DVR's IP address, followed by a semi-colon, followed
by the Web Server Port # into Internet Explorer. For
example, enter 192.168.2.1:2000 into Internet Explorer.
192.168.2.1 is the local IP address of the DVR. 2000 is the
Web Server Port number. The DVR and computer must
connect to the same router for this method to work.
• Press the ENTER button on your remote or on the DVR's
front control panel to view the DVR's network information.
ActiveX tool bar
Click to install ActiveX
58