User Authority; Log Out - Digimerge DHU600 Series Instruction Manual

Using the System Menu
5. Select APPLY and press ENTER to save
your settings or select CANCEL to restore
defaults.
6. Select CLOSE and press ENTER to exit.

USER AUTHORITY

Use the User Authority menu to assign
authorities/access to the "Manager"and
"User" groups.
Figure 21.3 User Authority menu
Only the ADMIN (administrator) has
NOTE:
access to the User Management/User
Authority menus.
To configure user authorities:
1. Select USER AUTHORITY and press
ENTER.
2. Under MANAGER and USER, select/
deselect the boxes for SETUP, PTZ,
SEARCH, ARCHIVING, and REMOTE
AGENT. Selecting the boxes will grant the
Manager/User access to these functions.
3. Click APPLY to save your settings or click
CANCEL to restore defaults.
4. Click CLOSE to exit.
42

LOG OUT

Use the Log Out menu to set Auto Logout and
Duration times.
Figure 21.4 Auto Logout menu
To configure Auto Logout:
1. Select LOG OUT and press ENTER.
2. Under AUTO LOGOUT select ON/OFF to
enable/disable Auto Logout. If ON, the
system will automatically log off the active
user after a certain length of time.
3. Under DURATION, set the length of time
for the system to automatically log off the
current user; select 1 MIN (default), 2 MIN,
3 MIN, 5 MIN, or 10 MIN.
4. Select APPLY and press ENTER to save
your settings or select CANCEL to restore
defaults.
5. Select CLOSE and press ENTER to exit.