Adjusting Audio Settings - Digimerge DHU600 Series Instruction Manual

Using Web Remote Viewer
8. Under the Motion Pop-up Dwell drop-down menu, select the duration of the motion pop-up
window.
• Motion Pop-up Durations are:1 second, 2 seconds, 3 seconds, 5 seconds, 10 seconds, 15
seconds, 20 seconds, 30 seconds, 40 seconds, 60 seconds.
9. Click OK to save your settings.

Adjusting Audio Settings

To adjust audio settings:
1. Click Sound on the navigation bar on the left. The Audio Setting window opens.
Figure 36.2 Audio Setting window.
2. Under the Live Audio drop-down menu, select ON or OFF to enable or disable live audio.
3. Under the Default Audio Channel drop-down menu, select an audio channel between
channel1~4.
4. Under the Network Audio Transmission (2-way audio) drop-down menu, select ON or OFF to
enable or disable two-way audio.
5. Under the Network Audio Receive (1-way audio) drop-down menu, select ON or OFF to
enable or disable one-way audio.
6. Under the Keypad drop-down menu, select ON or OFF to enable or disable the button 'beeps'
on the DVR.
7. Click OK to save your settings.
76