Rear Panel - Digimerge DHU600 Series Instruction Manual

REAR PANEL

Figure 2.2 Rear panel (16-channel model shown)
1. VIDEO IN : Camera input ports for BNC cameras; (16-channel configuration shown).
2. MONITOR: Composite output (top) to connect the system to a secondary monitor or DVR.
• : Spot Monitor output (bottom) (Spot monitor only displays cameras, not system
SPOT OUT
menus).
3. AUDIO IN: Connect up to four audio inputs.
4. AUDIO OUT: Connect a single audio output.
5. PAL / NTSC : Switch between PAL and NTSC video output.
6. ALARM IN: Alarm block to connect external alarm or motion devices (not included).
• : One alarm output can be connected.
RELAY
• : PTZ (Pan, Tilt, Zoom) camera connection.
RS-485
7. LAN: Connect an Ethernet cable to connect the system to a router or switch (not included).
8. DVI: DVIoutput to connect the system to a DVI monitor (not included). Use a DVI to VGA adapter (not
included) to connect a VGA monitor to the system.
9. DC 12V: Port for 12V power cable (included).
Keep the exaust fan on the side
panel clear for proper ventilation.
Inadequate ventilation causes the
unit to overheat.
1
3
2
5 6
4
8 9
7
Exaust Fan
5