Enabling Audio During Viewing; Syncing Video Audio; Muting Audio; Switching Channels - Digimerge DHU600 Series Instruction Manual

Enabling Audio During Viewing

You must have a microphone installed onto your system before you can hear audio during remote
viewing.
To enable the audio source while viewing:
• Click the to enable audio. Click again to disable audio

Syncing Video Audio

It is recommended to synchornize audio with the video (if audio is available). It is recommended
to have this setting ON when saving video files. Syncing audio with video ensures that there is no
delay between the video and audio.
To sync audio with video:
1. Click in the Navigation Bar. The Setup window opens.
2. Under Audio, select Sync.
3. Click the Live CH drop-down menu, and select the desired audio channel (CH 1~4).
4. Click Save.

Muting Audio

• To mute audio, press
The speaker icon displays a red X to indicate muted audio:

Switching Channels

• To switch channels, click the
select desired channel (Channels 1~16).

Choosing a Save Directory

To select your DVR's save directory:
1. Click in the Navigation Bar. The Setup window opens.
Figure 33.1 Settings Window.
.
drop-down menu in the Navigation Bar, and
Click here to open directory tree.
Using Web Remote Viewer
63