Enabling/Disabling Quick Setup; Password - Digimerge DH200+ Series Instruction Manual

Using Quick Setup (cont'd.)
4. Under PRIORITY, select QUALITY (the quality of the video) or RATE (frames per second). If you
select RATE, the video quality and frames per second will be at the lowest possible setting.
This will reduce overall video quality, but will maximize the available hard drive space. Adjust
this setting to best suit your recording environment and security needs. For details on
configuring recording options, see "RECORD" on page 28.
The necessary recording parameters will appear under RECORD SETUP INFO at the
NOTE:
bottom of the Quick Setup window.
5. Press the button to save your settings.
ENTER

Enabling/Disabling Quick Setup

You must disable Quick Setup in order to access the full system main menu.
To disable Quick Setup:
1. Under the ADVANCED tab, select
2. Select and press the
ON
The full main menu will appear when you press the MENU button.
To enable Quick Setup:
1. Press the MENU button. The Main menu opens.
2. Select and press the ENTER button.
DISPLAY
3. Under the DISPLAY SETUP tab, move the cursor to QUICK SETUP, select ON and press the
ENTER button.
4. Press the CANCEL/ESC button to exit.
Press the MENU button again to open the Quick Setup menu.

Password

The default system password is 000000. However, you do not have to enter a password upon initial
startup. You can enable this option in Main Menu>System>
on page 34. For complete information on changing your password and managing users on the
system, see "ACCOUNT" on page 34.
Figure 3.0 Enable password (optional)
RUN ADVANCED
button. The window closes. Quick Setup has been disabled.
ENTER
.
. For details, see "GENERAL"
General
Using the System
9