Samsung OfficeServ 100 General Description Manual page 87

E****************************** INDIVIDUAL STATIONS **************************
<—————————————OUTSIDE CALL ————————————> <-INTERNAL->
2 3 4
EXT STATION-NAME ATTA ANSD NOT-ANSD DIALLED ICM-TRSF TRK–TRK PICKUP ANSD DIALLED
201 0000
202 0000
203 0000
204 0000
205 0000
1.OUTSIDE CALL
These statistics are for outside calls that reached individual stations or devices regardless of
how they arrived there.
2.EXT
Listing of all extension numbers in the system. This also includes AA and VM ports.
3.STATION NAME
The name for each particular station as set in MMC programming.
4.ATTA
Average Time To Answer for stations is the time (in seconds) that ringing signal is applied to
a station for trunk calls and recalls. The ATTA is the sum of all answered times divided by
the answered call count. Uses the same calculation method as for individual trunk ATTA.
5.ANSD
This is a count of how many times an outside call was answered by the specific station. Out-
side calls recalling a station are not counted again when they are answered.
6.NOT–ANSD
This is a count of how many times a trunk call was directed to the station but was not an-
swered by the station.
7.DIALLED
Peg count of how many times the station made a valid outside call. An outside call is defined
by the SMDR START TIME in MMC programming.
8.ICM–TRSF
This is the number of times a trunk call was successfully transferred to another station. It in-
cludes both screened and unscreened transfers.
9.TRK–TRK
This is the number of times a trunk call was transferred to another trunk (tie line) This is
called a trunk–to–trunk transfer. This field is pegged every time the station completes a
trunk-to-trunk transfer.
5 6 7
0000 0000 0000
0000 0000 0000
0000 0000 0000
0000 0000 0000
0000 0000 0000
1
8 9 10
0000 0000 0000
0000 0000 0000
0000 0000 0000
0000 0000 0000
0000 0000 0000
4-51
11
12 13
0000 0000
0000 0000
0000 0000
0000 0000
0000 0000