Samsung OfficeServ 100 General Description Manual page 20

Digital communications system
Hide thumbs Also See for OfficeServ 100:
Table of Contents

Advertisement

2-5
6MWSLI
100V pulse for message waiting LED working. Provides six SLI ports for industry–standard
single line telephones and the ability to provide a loop-disconnect signal and a message-
waiting signal. This card does not provide Long Line protection.
Keyset Daughterboards
A variety of keyset daughterboards (KDB) are available. If installed in a digital keyset con-
nected to the Basic KSU, a KDB provides a second DLI or SLI port. (See
Station
Equipment,
below, for full details.)
3. Other Cards
MISC 3 or MISC 4
MISC 3 provides a DTMF receiver (4 channels), background music, paging, three general-
purpose relays, and an optional Modem. MISC 4 provides all the MISC 3 card functions and
also provides a 4-port AA function.
NOTE: In future releases, the MISC card will also support the FSK (Frequency Shift Keying) Caller ID
feature supporting CLIP information for SLT phones (a maximum of 16 channels for CID Tx & Rx
ports).
It is strongly recommended that a MISC card be used in situations requiring heavy single line
telephone use.
MODEM
This card is a built–in modem and is installed on a MISC card.
SVMi-4
The SVMi-4 is a self-contained Voice Mail and Auto Attendant system on a single card. It is
designed to meet the demands of the sophisticated voice mail user without sacrificing sim-
plicity. The SVMi-4 may act as an Auto Attendant system only, a Voice Mail system only, or
both.
By default, the SVMi-4 can handle two calls simultaneously. It can be easily upgraded to
handle up to four calls simultaneously. No external line or power connections are necessary.
The standard memory capacity is about 5 hours using a 64MB memory card. (Higher capac-
ity Flash memory cards are available from Samsung.)
SVMi-8
The SVMi-8 Voice Mail system is a fully integrated Auto Attendant/Voice Mail/Fax system on
a single card. This optional card provides four or eight communication channels. Only one
card is permitted per system and it should be installed in a dedicated slot in the Expansion
cabinet. (This should be the first dedicated slot in an Expansion type B cabinet.)

Advertisement

Table of Contents
loading

Table of Contents