Samsung OfficeServ 100 General Description Manual page 68

Chapter 4
4-32
Business Features Package
One-Time Do Not Disturb
The Do Not Disturb (One Time) feature is used to stop all calls to a station when the user is
on an outside line and does not want to be disturbed for the duration of the call. Upon com-
pletion of the call, DND is cancelled and the station is returned to normal service. This fea-
ture requires a programmed key.
One-Touch Dialling Keys
Frequently-used speed dial numbers can be assigned to one-touch dialling keys for fast ac-
curate dialling.
On-Hook Dialling
Any keyset user can originate calls without lifting the handset. When the called party answers,
the user may speak into the microphone or lift the handset for more privacy.
Programmable Keys
Keysets have a number of programmable keys. The number depends on the type of keyset,
e.g. 14 (DS-5014D), 21 (DS-5021D), 24B (Euro), 12B (Euro), and so on. To personalise a
keyset, each key can be programmed for one of many different uses. Examples of key as-
signments include individual outside lines, individual stations (DSS), group of lines, group of
stations and one-touch speed dial keys. Using these keys eliminates the need to use dialling
access codes.
Feature keys that can have extenders to make them more specific include SPEED DIAL,
SUPERVISOR, PAGE, DSS, DIRECTED PICKUP, GROUP PICKUP, BOSS, PARK, PRO-
GRAMMED MESSAGE, IN AND OUT OF GROUP, FORWARD and VOICE MAIL TRANS-
FER. For a full listing of keys and extenders, refer to the Samsung OfficeServ 100 Program-
ming Guide or System Administration Guide.
Programmed Station Messages
A station user may select one of a number of messages to be displayed both at a calling
party's keyset and on the station's display. There are 15 possible messages (01–15) sup-
ported.
Messages 01–10 are pre-set with a selection of single-line text, but these can be changed in
programming. The remaining messages (11–15) can be customised by the system adminis-
trator, up to 16 characters maximum.
NOTE: The calling party must have a display keyset to view these messages.
Protection from Barge-In
Each station can be programmed as secure or not secure. Secure stations cannot be
barged-in on. Nor can a station that is not secure be barged-in on when talking to a secure
station.
Pullout Directory Tray (DCS Euro keysets)
A pullout directory tray is conveniently located beneath all DCS (Euro) keysets. It is used to
record station directory names and speed dial numbers.