How To Change The Default Rate - Neopost IS-480 User Manual

How to Change the Default Rate

To change the default rate:
1. As supervisor (see
Press
Default user settings
2. Select the default rate using the rate wizard.
3. Press [OK] to validate.
See also
Managing Postal Rates
•
8
Default Permit
The default permit is automatically selected when the [Permit Mail ] type of stamp is
activated.
216
How to Log in as Supervisor
and type 3.3.3 or select the path:
Default imprint parameters
on page 244
on page 194 ):
Default rate