Time And Date Management; How To Check/Adjust The Machine Time And Date - Neopost IS-480 User Manual

8.13
Daylight Savings Time Transitions
Your Mailing System normally auto-adjusts to Daylight Savings Time . However, if a manual
adjustment is necessary, you can use either of the following procedures to correct the
Mailing System time:
• As a user:
• As supervisor:
Time and Date Setup
Time and date are required for postage and are provided by the postal authorities. As a
8 result, you cannot manually adjust the system time and date.
However, you can ask the system to check the current time and date and display them.
See also
Re-dating Mail
•
Automatic Date Advance
•

How to Check/Adjust the Machine Time and Date

To check/adjust the current time and date:
1. As supervisor (see
Press
System settings
228

Time and Date Management

How to Unlock the PSD
How to Check/Adjust the Machine Time and Date
To check the time and date, make sure the connection to the Postal
Services is available. See
Connection on page 225 .
on page 53 .
on page 219 .
How to Log in as Supervisor
and type 6.4 or select the path:
Date and time
If you are processing postage at the time when the system clock
adjusts for daylight savings time, the Mailing System will wait until
you are finished before displaying the new time.
on page 112
How to Set the Postal/Online Services
on page 194 ):
on page 228 .