Rs-232 Parameter Defaults - Motorola LI2208 Product Reference Manual

RS-232 Parameter Defaults

Table 4-1 lists the defaults for RS-232 host parameters. If any option needs to be changed, scan the
appropriate bar code(s) provided in the Parameter Descriptions section beginning on
NOTE See
miscellaneous default parameters.
RS-232 Host Default Table
Table 4-1
RS-232 Host Parameters
RS-232 Host Types
Baud Rate
Stop Bit Select
Check Receive Errors
Parity Type
Data Bits (ASCII Format)
Hardware Handshaking
Software Handshaking
Host Serial Response Time-out
RTS Line State
Beep on <BEL>
Intercharacter Delay
Nixdorf Beep/LED Options
Ignore Unknown Characters
Appendix A, STANDARD DEFAULT PARAMETERS
Parameter
for all user preferences, hosts, symbologies, and
Default
Standard 4-6
9600 4-8
1 Stop Bit 4-9
Enable 4-9
None 4-10
8-bit 4-10
None 4-12
None 4-14
2 sec 4-15
Low RTS 4-16
Disable 4-16
0 msec 4-17
Normal Operation 4-18
Send Bar Code 4-18
RS-232 INTERFACE
page 4-4.
Page
Number
4 - 3